![SimuTech Group](/img/default-banner.jpg)
- Видео 257
- Просмотров 2 332 586
SimuTech Group
США
Добавлен 20 янв 2013
We empower engineers worldwide.
We help analyze and improve product efficiency, reliability, and performance using ANSYS engineering simulation software and physical testing. We are an ANSYS Elite Channel Partner, providing sales, support, training, consulting and mentoring for ANSYS finite element analysis (FEA), computational fluid dynamics (CFD), electromagnetic (EM) software, and optics and photonics. Learn more at www.simutechgroup.com.
We help analyze and improve product efficiency, reliability, and performance using ANSYS engineering simulation software and physical testing. We are an ANSYS Elite Channel Partner, providing sales, support, training, consulting and mentoring for ANSYS finite element analysis (FEA), computational fluid dynamics (CFD), electromagnetic (EM) software, and optics and photonics. Learn more at www.simutechgroup.com.
SimuTech Services Overview
Get in touch:
→ info@simutechgroup.com
→ (800) 566-9190
→ simutechgroup.com
Sign up for live or online Ansys Training Courses:
simutechgroup.com/services/an...
Subscribe to this channel: / @simutechgroup
→ info@simutechgroup.com
→ (800) 566-9190
→ simutechgroup.com
Sign up for live or online Ansys Training Courses:
simutechgroup.com/services/an...
Subscribe to this channel: / @simutechgroup
Просмотров: 68
Видео
How to Use the Restart Analysis Extension in ANSYS Mechanical
Просмотров 3152 месяца назад
See how to use the Restart Analysis Extension in ANSYS Mechanical. This restart analysis extension is included in Ansys Workbench 23 R one and up. Video prepared by SimuTech Group Engineer Krishna Raichur. #ansyslearning #ansysmechanical #finiteelementanalysis #baseanalysis Get in touch: → info@simutechgroup.com → (800) 566-9190 → simutechgroup.com Sign up for live or online Ansys Training Cour...
Engineering Simulation: The Future of Product Development
Просмотров 29 тыс.2 месяца назад
Engineering is the future of product development. At SimuTech Group, we offer the full portfolio of Ansys software products and services to help you turn ideas into reality. Learn more: simutechgroup.com/services/ Subscribe to this channel: / @simutechgroup
Menlo Micro: Advancing MEMS Switch Capabilities via Engineering Simulation Software
Просмотров 1573 месяца назад
Menlo Micro leverages Ansys engineering simulation software in partnership with the expert simulation consultants at SimuTech Group (a leading Ansys Apex Channel Partner) to deliver the Ideal Switch, the world’s highest power micro-electromechanical systems (MEMS) switch. In its reduced size and weight, the Ideal Switch increases power handling and reliability while reducing switching time and ...
Importing GDS Files (into Ansys Lumerical)
Просмотров 4795 месяцев назад
This video shows how to import custom geometries from GDSII formats into Ansys Lumerical software. Created by Photonic Engineer, Stephen Lin. #lumerical #photonics #ansystutorial #ansyslearning Get in touch: → info@simutechgroup.com → (800) 566-9190 → simutechgroup.com Sign up for live or online Ansys Training Courses: simutechgroup.com/services/ansys-training/ Subscribe to this channel: ruclip...
Launch Ansys Mechanical Independently
Просмотров 3856 месяцев назад
NEW in Ansys 2024 R1, this video illustrates a new workflow with ANSYS Mechanical whereby Mechanical can be launched independently from the conventional Workbench project page. #ansystutorial #ansysmechanical #ansyslearning Get in touch: → info@simutechgroup.com → (800) 566-9190 → simutechgroup.com Sign up for live or online Ansys Training Courses: simutechgroup.com/services/ansys-training/ Sub...
Ansys Lumerical: How to Create Sweeps through the GUI
Просмотров 3246 месяцев назад
This video demonstrates how to create sweeps through the GUI. We go into detail on setting the sweep parameters, reported results, and functions available for data plotting. Created by Photonics Engineer Stephen Lin. #ansystutorial #photonics #simulationengineering Get in touch: → info@simutechgroup.com → (800) 566-9190 → simutechgroup.com Sign up for live or online Ansys Training Courses: simu...
How to Model Natural Convection in Ansys Discovery
Просмотров 4447 месяцев назад
This video shows how to model natural convection in Ansys Discovery Tutorial prepared by Eric Alana, SimuTech Group Engineer. #fluidflow #naturalconvection #air #discovery #heattransfer #ansystutorial Get in touch: → info@simutechgroup.com → (800) 566-9190 → simutechgroup.com Sign up for live or online Ansys Training Courses: simutechgroup.com/services/ansys-training/ Subscribe to this channel:...
Use of Construction Geometry Paths and Surfaces
Просмотров 6817 месяцев назад
Demonstration how to generate and use construction geometry paths and surfaces for post processing. Created by SimuTech Group Engineer Andy Miles. Get in touch: → info@simutechgroup.com → (800) 566-9190 → simutechgroup.com Sign up for live or online Ansys Training Courses: simutechgroup.com/services/ansys-training/ Subscribe to this channel: ruclips.net/channel/UCR1bC8EjDb_n5asVEtzsLEQ
Modeling Cavitation using Multiphase Mixture Model - Computational Fluid Dynamics
Просмотров 2147 месяцев назад
In this computational fluid dynamics (#CFD) tips & tricks video, see an overview of how to set up a cavitation model, along with some extra tips on model behavior and obtaining a stable solve. Presented by Jeff Collins, SimuTech Group Engineer. #Cavitationphasechange #multiphase #cfd_simulation #ansystutorial Get in touch: → info@simutechgroup.com → (800) 566-9190 → simutechgroup.com Sign up fo...
How to Extract Magnet BH Curve Data from Manufacturer Datasheet using Ansys Maxwell SheetScan Tool
Просмотров 5737 месяцев назад
Ever struggled to extract BH curve data for magnets from the manufacturer's datasheet? Watch as Sr. Staff Engineer Amed Abdelrahman demonstrates the capabilities of Ansys Maxwell's SheetScan Tool in action. Discover how this tool effortlessly retrieves BH curve data from datasheet images. Get in touch: → Email: info@simutechgroup.com → Phone: (800) 566-9190 → simutechgroup.com Sign up for live ...
How to Link Excel Variables to Workbench Parameters
Просмотров 6148 месяцев назад
This video describes how to link variables from an MS Excel Workbook to Ansys Workbench so that they can be used as input and output parameters. #ansyslearning #ansystutorial #ansysworkbench Get in touch: → Email: info@simutechgroup.com → Phone: (800) 566-9190 → simutechgroup.com Sign up for live or online Ansys Training Courses: simutechgroup.com/services/ansys-training/
Using Parameters in Discovery Live
Просмотров 3148 месяцев назад
This Tips and Tricks video This video shows how to set up a parameter study in Discovery Live. Video created by Lead EngineerTyle Coffey. #howto #ansystutorial #ansys3ddesign Get in touch: → Email: info@simutechgroup.com → Phone: (800) 566-9190 → simutechgroup.com Sign up for live or online Ansys Training Courses: simutechgroup.com/services/ansys-training/ Subscribe to this channel: ruclips.net...
HFSS Workflow forPCB-based Antennas (part 1)
Просмотров 4329 месяцев назад
PCB-based antennas are a popular choice in various applications, including Wi-Fi, Bluetooth, and many IoT devices. In part 1 of this series, we will explore the workflow for designing, tuning, and optimizing a PCB-based chip antenna board using Ansys HFSS and the Circuit tool. This video demonstrates the application of the HFSS Characteristic Mode Solver and the utilization of Analytic Derivati...
Topography Optimization in Ansys Mechanical
Просмотров 8649 месяцев назад
This video, created by Brock Wilt - Lead Engineer, highlights a new structural optimization method in Ansys Mechanical 2023 R1 called Topography Optimization to introduce ribbing/beads into shell models. #TopographyOptimization #ShellMesh #MorphingShape #AnsysTips #ansystutorial Get in touch: Contact form: simutechgroup.com/contact-us → Email: info@simutechgroup.com → Phone: (800) 566-9190 simu...
Solution Fidelity in Ansys Discovery
Просмотров 32510 месяцев назад
Solution Fidelity in Ansys Discovery
Working with Shells and Beams in Discovery
Просмотров 71010 месяцев назад
Working with Shells and Beams in Discovery
Contact Pressure-Dependent Thermal Contact Conductance in Ansys Mechanical
Просмотров 1,1 тыс.11 месяцев назад
Contact Pressure-Dependent Thermal Contact Conductance in Ansys Mechanical
Ansys Zemax OpticStudio STAR module
Просмотров 64911 месяцев назад
Ansys Zemax OpticStudio STAR module
Volume Extract in Ansys Discovery
Просмотров 1,4 тыс.11 месяцев назад
Volume Extract in Ansys Discovery
Swept Mesh Using MultiZone Controls in Ansys Fluent Meshing
Просмотров 2,8 тыс.Год назад
Swept Mesh Using MultiZone Controls in Ansys Fluent Meshing
Applying a hub and shroud rolling ball fillet in TurboGrid within Ansys
Просмотров 634Год назад
Applying a hub and shroud rolling ball fillet in TurboGrid within Ansys
Different Methods for Saving Ansys Fluent Setups
Просмотров 1,8 тыс.Год назад
Different Methods for Saving Ansys Fluent Setups
How to use "Copy to Clipboard" to copy items into another session within Ansys Fluent
Просмотров 553Год назад
How to use "Copy to Clipboard" to copy items into another session within Ansys Fluent
Plotting Phase for Binary2 Surfaces in Ansys OpticStudio
Просмотров 166Год назад
Plotting Phase for Binary2 Surfaces in Ansys OpticStudio
How to Imprint multiple washer faces in a single operation with Pull Copy Edge in Ansys SpaceClaim
Просмотров 2 тыс.Год назад
How to Imprint multiple washer faces in a single operation with Pull Copy Edge in Ansys SpaceClaim
Ansys Mechanical Object Generator- Multiple to Single
Просмотров 609Год назад
Ansys Mechanical Object Generator- Multiple to Single
Hi, i want to know the value of primary and secondary side leakage inductance. So, total leakage inductance is Lr = L11*(1-k^2). Then, how much primary side leakage inductance?
Hello and thank you for your comment! If you are interested in any of our engineering services, please email info@simutechgroup.com. You can also check out SimuTech Skills Center, a training portal that contains training material and tips and tricks videos that have been created by SimuTech engineers: skillscenter.simutechgroup.com/
Hello, thanks for the informative video. Do I need a copy of Ansys installed on the remote desktop/server as well to run RSM?
Hi - the short answer is 'Yes.' If you are interested in any of our engineering services, please email info@simutechgroup.com. You can also check out SimuTech Skills Center, a training portal that contains training material and tips and tricks videos that have been created by SimuTech engineers: skillscenter.simutechgroup.com/
I am running a 2D transient simulation(VOF Fluent) in which vapor bubbles are generated at the bottom surface of a rectangular domain that is initially full of water with heat flux given at the bottom wall. I was trying to patch a single vapor bubble by creating a hemispherical region. I can see my volume fraction contour with the bubble after patching a hemispherical region at the bottom of the liquid. The simulation is also running perfectly when I click on "Run Calculation". When I do this same bubble patch operation through a DEFINE_INIT UDF, I can see the bubble getting patched in the vapor phase contour, but the calculation is not running. It is giving the following error in the 1st iteration itself. Divergence detected in AMG solver: vof-1 Divergence detected in AMG solver: x-momentum Divergence detected in AMG solver: y-momentum Divergence detected in AMG solver: pressure correction Divergence detected in AMG solver: pressure correction Divergence detected in AMG solver: temperature UDF code #include "udf.h" DEFINE_INIT (init2, domain1) { Message("solution initialised"); cell_t cell; Thread *cell_thread; Domain *subdomain; int phase_domain_index; //Initialisation of heater layer sub_domain_loop(subdomain, domain1, phase_domain_index) { if(DOMAIN_ID(subdomain) == 2) { thread_loop_c (cell_thread,subdomain) { begin_c_loop_all (cell,cell_thread) { real arr[ND_ND]; C_CENTROID(arr,cell,cell_thread); if (sqrt(ND_SUM(pow(arr[0],2),pow(arr[1],2), pow(arr[2],2)))<=0.00000002) { C_VOF (cell, cell_thread) = 0. ; C_P(cell, cell_thread)= 5846400; } else { C_VOF (cell, cell_thread) = 1. ; } } end_c_loop_all (cell,cell_thread); } } } } When I am running the calculation I am getting this error, but there is no error when I am patching it without udf by creating a region. I want this patching operation to be done via udf, so I can generate new bubbles after every time step in a specific pattern. (I will be using EXECUTE_AT_END for that ). I would be grateful if you can help me sir.
Hello and thank you for your comment. Unfortunately, this is a very involved scenario. If you are interested in any of our engineering services, please email info@simutechgroup.com. You can also check out SimuTech Skills Center, a training portal that contains training material and tips and tricks videos that have been created by SimuTech engineers: skillscenter.simutechgroup.com/
Why can't all tutorials be like this? Straight to the point, short, concise, awesome. Thank you!
very useful tutorial. How to assign port for a broadside coupled strip line and view their odd and even mode impedances in HFSS.
Hello and thank you for your comment. If you are interested in any of our engineering services, please email info@simutechgroup.com. You can also check out SimuTech Skills Center, a training portal that contains training material and tips and tricks videos that have been created by SimuTech engineers: skillscenter.simutechgroup.com/
the linke plzz
😂
I am a final year Petroleum engineering student using ANSYS for my project to model slug flow/fluid flow through 90 degrees bend pipe (fluent). Please How do I setup wire mesh sensor and electrical capacitance tomography in fluent application or is supposed to be part of my geometry and if yes how go about that ?🙏🏾. I am at my wits end, I have tried everything I know but can't see the effects after simulation. Any guidance, directions or suggestions are warmly welcomed and appreciated 🙏🏾
Hello and thank you for your comment. Unfortunately, this is a very involved scenario. If you are interested in any of our engineering services, please email info@simutechgroup.com. You can also check out SimuTech Skills Center, a training portal that contains training material and tips and tricks videos that have been created by SimuTech engineers: skillscenter.simutechgroup.com/
Excellent. One thing i dont see is defining the contacts/connections between the fillet and the body.
Hello - we've shared your feedback with our engineering team. If you are interested in any of our engineering services, please email info@simutechgroup.com. You can also check out SimuTech Skills Center, a training portal that contains training material and tips and tricks videos that have been created by SimuTech engineers: skillscenter.simutechgroup.com/
"Not available for Polyhedral mesh" was a time saver, thank you :)
I see the mesh of the fillet is not conformal with the vertical and horizontal plate?
You F****** ROCK! For ages looking for how to do this!
I have a question. I am trying to build a similar model. Imagine your domain is split in half at that notch in the middle. One side of the domain will be stationary and the other side of the domain will be rotating around z axis. Although the periodic surfaces are still there, you have 2 of them which belong to the stationary fluid domain, and 2 belong to the rotating domain. Do you need to set up 2 separate periodic surfaces in fluent mesher? One matching the sides in stationary and one matching the sides in rotating domain. Or would it matter if you picked two surfaces from different domains and tag them with the same periodic surface? I am not sure if I was able to explain my question. In a nutshell, instead of 1 domain, I have 2. One rotating and one stationary. I would mesh it in workbench mesher but I am asked to use fluent mesher and I am not sure about it's capabilities
Thank you for your question - unfortunately, this is a very involved scenario. If you are interested in any of our engineering services, please email info@simutechgroup.com. You can also check out SimuTech Skills Center, a training portal that contains training material and tips and tricks videos that have been created by SimuTech engineers: skillscenter.simutechgroup.com/
A second model could be developed, considering heating the plates before welding them and checking the final stresses after the slow cooling process of the entire joined piece. What do you think?
Hi, and thank you for your questions. Yes, that’s certainly possible. You would need to set the initial body temperature of the plates. If you were interested in any time domain effects, it would be required to run a transient thermal analysis and apply these to the structural analysis to then perform the thermal stress analysis and capture the time history of the cooling process. Should you have additional questions, please reach out to us at info@simutechgroup.com or explore the SimuTech Skills Center skillscenter.simutechgroup.com/ssc/landing-page
good work
Could you please share the equation in the field calculator with higher quality?
Is writing the 'report definition' out after the simulation possible? I have .dat files that could check the value, but I can not find a way to write it out.
Hi and thank you for your question. Please use “Report Files” just below “Report Definition” in the project tree. In Report file you can create a file based on any Report Definition that you have created. Should you have additional questions, please reach out to us at info@simutechgroup.com or explore the SimuTech Skills Center skillscenter.simutechgroup.com/ssc/landing-page
I could save several hundreds hours if I watched this video three months ago. Thank you a lot!
Glad it helped! For more tips like these, check out SimuTech Skills Center: skillscenter.simutechgroup.com/
Good video! Just one question: at the end of the video you didn't select "intrinsic" when you imported the curve (that seems a polarization curve and not a normal curve), Oversight? Thanks for the reply.
Thanks for your comment. This is just to show how to use the sheetscan tool, but you are right: if we need to perform a demagnetization analysis for example, this has to be intrinsic. However, note that the curve should be smoothed out and start with zero to be able to assign it as intrinsic.
02:47, receiving error which generates a dump file without any details. Somehow, I can't gather original and inverse models in Workbench, where you have in system D.
Hi, I followed strickly the steps, but the resuling topology shape is not the same, it was removed more material. Do you solove the problem? Thanks
Hello and thank you for your comment. Unfortunately, this is a very involved scenario. If you are interested in any of our engineering services, please email info@simutechgroup.com. You can also check out SimuTech Skills Center, a training portal that contains training material and tips and tricks videos that have been created by SimuTech engineers: skillscenter.simutechgroup.com/
@@SimuTechGroup thank for your feedback. I solved the proplems!
Does anyone know if the student version of Ansys will let you import GDS files? My student version crashes when I try to import GDS. This is an excellent simulation software.
The small offset was the key!!!, Thanks
Thank you for the demo. Is it possible to add the pivot feature? If IGVs are there which can be rotted about its pivot, then they are subjected to have leakage flow. In that case, it is important to model the pivot in the clearance and mesh it. Is it possible to mesh this feature in new turbogrid? Also, is it possible to mesh the cooling holes in turbogrid. Thank you.
Hi, and thank you for your comment. We've shared your feedback with the Engineering Team.
such a great video!
How did you define the edge? Thanks for the video!
Thank you for your comment. The edge can be defined in either Ansys Discovery Modeling, Ansys SpaceClaim, Ansys DesignModeler or in the CAD package that the geometry was created in. If you are interested in simulation services like mentoring, training, and consulting, please send us an email at info@simutechgroup.com. Alternatively, you can check out the Ansys Learning Hub here: www.ansys.com/services/ansys-learning-hub and if you are a student, see Ansys’ academic forum here: forum.ansys.com/
so, by change the topology to "merge", the big volume will automatically be split into 2 volumes, right? this is different from what I am struggling now
Hi, thank you for your question. Assuming you are referring to the first model shown (ie; the rectangular volume with the thin plate with the pattern of holes in it), no, the Share Topology, Merge setting does not split the volume. Using the Share Topology, Merge setting effectively imprints the hole pattern that is on the fluid volume on the left onto the fluid volume on the right once it is taken the meshing application (ie; either Ansys Workbench Meshing or Fluent Meshing). If you are interested in simulation services like mentoring, training, and consulting, please contact us: simutechgroup.com/contact-us Alternatively, you can check out the Ansys Learning Hub here: www.ansys.com/services/ansys-learning-hub and if you are a student, see Ansys’ academic forum here: forum.ansys.com/
@@SimuTechGroup i think I got the reason of my problem: share. looks like that I need to define the share tolerance in the space claim .Thank you for your reply:)
Can you give the temperature to the node? on the command ? Looking at your lecture, it seems like you can apply pressure to the node, but there is no temperature.
Hi and thanks for your questions. As a load in Mechanical, no. In the Mechanical GUI temperature loads are applied as Thermal Conditions on bodies only, as a constant temperature across the body. To apply a temperature distribution (ie; a result from a steady state thermal or transient thermal that is contained in the same Workbench project), link the Solution cell from the Steady State Thermal or Transient Thermal to the Setup cell in the Static Structural in the Project Schematic in Workbench. Temperature loads can be applied as body forces on elements via commands, not to nodes.
Is that right? Or, I think, what do you think about adopting giving the temperature according to each location from external data? I think it is the same as giving temperature to the node.@@SimuTechGroup
Well understood Sir. Thanks for sharing
Thank you for your comment!
how we can draw the graph between leakage inductance and thickness of the inductor
Hi there. In this case, the thickness of the transformer needs to be parametrized. Once the simulations are completed, the graph leakage inductance vs. the thickness can be generated by replacing the default Freq by the defined transformer thickness parameter. Hope this helps! If you have additional questions, or are interested in Ansys Training or Mentoring, please reach out to info@simutechgroup.com
What is the procedure when you need to move several objets in one translation movement? I have the following error messge : " A wrapper object is required to contain all the moving objects in band for translation motion. The result will be wrong " Regards,
Thank you for your comment. If you are interested in simulation services like mentoring, training, and consulting, please send us an email at info@simutechgroup.com. Alternatively, you can check out the Ansys Learning Hub here: www.ansys.com/services/ansys-learning-hub and if you are a student, see Ansys’ academic forum here: forum.ansys.com/
Thank you.I have a case like the situation in video,but needs to be applied an angular displacement.When I use the rotx command,its unit is rad or degree,and can APDL recognize the pi without any additional set?
Thank you for your questions -- First, solver units for angular displacement are always in radians. Next, APDL does not recognize the pi without any additional set. Define a parameter called ‘pi’ in the command snippet like this: pi=acos(-1) Then define your rotation in the D command as multiples of the previously defined ‘pi’ parameter. Like this: D,my_pilot,ROTZ,pi/2 (this would define 90 degrees rotation, ie; pi/2) Should you have additional questions, please direct them to info@simutechgroup.com or check out the SimuTech Skills Center: simutechgroup.com/resources/skills-center/
Hi i dont know why but in my ansys if i click geometry i cant see the layered section option do u know why i cant access it ? thanks
Thank you for your comment -- to access Technical Support, reach out to your Ansys provider.
hello sir, I sent to you an email for assistance, could you just confirm me that you received it well?
How to choose different surface under construction geometry?
Thank you for your comment. Currently as of ANSYS release 2024 R1, only coordinate systems can be used to define construction geometry surfaces. To define another construction geometry surface, one needs to define, position, and orient another coordinate system. Should you have additional questions, check out the SimuTech Skills Center at www.simuportal.com/ssc/landing-page or please email info@simutechgroup.com
I showed your video lecture for contact tool, and thank you very much. I have a question about a problem I have never experienced with the contact tool. When I insert a contact tool, a question mark appears in the upper left corner of the contact tool. Even if you try to delete it, it says that some paths to the contact tool cannot be found and it is not deleted. I would appreciate it if you could tell me what the cause is and possible ways to solve it. Thank you in advance
Thank you for your comment! Unfortunately, the question posed is not something we can answer without knowing the details of your particular model. We highly suggest you submit a support case to your support provider. If you'd like additional information, you can reach out to info@simutechgroup.com
Great place for work environment
It sure is!
Thanks! Can you make a video on aeration flow in spillway by using LES and DES techniques
Thank you for your comment! We've forwarded this request to our engineers.
Great video thank you
Really informative video, thank you!
How did you create the geometry? pleaseee
Its because of videos like these that I'm subscribed. 😂
If anyone understand ,pls help me to define surface?
Thank you for your comment. The construction geometry ‘surface’ is defined by the intersection of an X-Y plane that passes through the model. Typically one can define the location and orientation of an existing or new coordinate system so that the X-Y plane passes through the model at the area of interest. The help menu in ANSYS also has further information how to define and use these construction geometry surfaces. Should you have additional questions, reach out to info@simutechgroup.com
thanks for video, where can I fine some documentation for better understanding of what are harmonic indices
Thank you for your comment! You can check out our comprehensive library of educational materials for Ansys products here: simutechgroup.com/resources/skills-center/ We share videos, lectures, tutorials, and workshop problems that will help you familiarize yourself with Ansys tools and better understand how and when to use them. If you are interested in training, mentoring, or consulting with SimuTech Group, please send us an email at info@simutechgroup.com
Great video, thanks... If you would like to take it one step ahead, import points into Excel, do a best fit curve, recreate points using the equation in a more uniform distribution. This prevents any non-uniform slope changes between any two points by creating a much smoother curve.
Thanks for sharing!
Big Help. You're awesome. Thank you.
Hi my question, I am using ANSYS 2023 R2. By using RSM can I design and pre-process job in Ansys mechanical while another job being solved in the Ansys solver?
Thank you for your question! The short answer is 2 licenses are required. Using RSM doesn’t multiply your licenses - it allows you to use bigger, remote computing hardware.
How can you save this transformed mesh?
Hello, thank you for the comment. We apologize for the delay in our response. After connecting with our engineering team they advised that once the mesh is reflected, you can save it just like any other CFX model. If you are interested in learning more about training, mentoring, or consulting please send us an email at info@simutechgroup.com
Hello. I'm curious about the process of defining a Fully Integrated Solid Mesh with SOLID 186. Do you have any videos or tips related to this?
Thank you for your comment. At this time, we do not have any videos related to this, but your request has been shared with our engineering team. In the meantime, if you are interested in paid Ansys training, mentoring, or consulting please send us an email at info@simutechgroup.com to get in touch with our team.
Thanks a lot for the explanation. Can you post a screenshot of your temperature settings of the time dependent heat load (steady-state thermal b5 -> temperature)? That would be quite helpful!
We've forwarded your request to the engineering team. Should you have additional questions, please reach out to info@simutechgroup.com Thank you for watching!